Loading ...
Loading ...
Loading ...
168 IN CASE OF EMERGENCY
Tire Service Kit Components And
Operation
Tire Service Kit Components
USING THE MODE SELECT KNOB AND HOSES
Your Tire Service Kit is equipped with the following
symbols to indicate the air or sealant mode.
Selecting Air Mode
Push in the Mode Select Knob (6) and turn to
this position for air pump operation only. Use
the Black Air Pump Hose (8) when selecting
this mode.
Selecting Sealant Mode
Push in the Mode Select Knob (6) and turn to
this position to inject the Tire Service Kit
Sealant and to inflate the tire. Use the Sealant
Hose (clear hose) (4) when selecting this mode.
Using The Power Button
Push and release the Power Button (3) once to
turn on the Tire Service Kit. Push and release
the Power Button (3) again to turn Off the Tire
Service Kit.
Using The Deflation Button
Push the Deflation Button (2) to reduce the air
pressure in the tire if it becomes overinflated.
Tire Service Kit Usage Precautions
Replace the Tire Service Kit Sealant Bottle (1) and
Sealant Hose (4) prior to the expiration date (printed at
the upper left hand corner on the bottle label) to assure
optimum operation of the system
Ú page 171.
Tire Service Kit Expiration Date Location
The Sealant Bottle (1) and Sealant Hose (4) are a one
tire application use and need to be replaced after each
use. Always replace these components immediately at
your original equipment vehicle dealer.
When the Tire Service Kit sealant is in a liquid form,
clean water and a damp cloth will remove the material
from the vehicle or tire and wheel components. Once
the sealant dries, it can easily be peeled off and prop-
erly discarded.
For optimum performance, make sure the valve stem
on the wheel is free of debris before connecting the
Tire Service Kit.
You can use the Tire Service Kit air pump to inflate
bicycle tires. The kit also comes with two needles,
located in the Accessory Storage Compartment (on the
bottom of the air pump) for inflating sport balls, rafts,
or similar inflatable items. However, use only the
Air Pump Hose (8) and make sure the Mode Select
Knob (6) is in the Air Mode when inflating such items to
1 — Sealant Bottle
2 — Deflation Button
3 — Power Button
4 —Sealant Hose (Clear)
5 — Pressure Gauge
6 — Mode Select Knob
7 — Power Plug (located on the bottom side of the Tire
Service Kit)
8 — Air Pump Hose (Black)
23_LX_OM_EN_USC_t.book Page 168
Loading ...
Loading ...
Loading ...