Loading ...
Loading ...
Loading ...
17. Materials
468
0 Check if your PC supports SDXC memory cards.
0 When connecting the camera to the PC, a message recommending that the card be
formatted may be displayed. Do not format the card.
0 If the [Access] displayed on the monitor does not disappear, turn off the camera and
disconnect the USB connection cable, and then connect again.
0 Pictures cannot be printed using a printer that does not support PictBridge.
0 Set to [PictBridge(PTP)] in [USB Mode]. (l
355)
0 If the printer has trimming or borderless printing functions, cancel these settings
before printing.
(Refer to the operating instructions for your printer.)
0 Depending on the photo studio, images recorded with their aspect ratio set to 16:9
can be printed at sizes in 16:9 aspect ratio. Ask the photo studio in advance.
0 An alarm may sound when a door is opened while writing to a card. Wait until writing
finishes, then turn the camera off and remove the card or battery.
0 The sound is caused by the in-body stabilizer. This is not a malfunction.
0 Depending on the lens you attach, it may move inside and create a sound. This is
not a malfunction.
0 This is the noise of the dust reduction function working (l
472); it is not a
malfunction.
The card is not recognized by the PC.
(SDXC memory card is used.)
Cannot print when the camera is connected to a printer.
The ends of the images are cut at printing.
Others
An alarm sounds when the card door or battery door is opened.
When I shake the camera, I hear a rattling sound from the camera.
When I shake the camera, I hear a rattling sound from the attached
lens.
The camera makes a noise when it is turned on.
Loading ...
Loading ...
Loading ...