Loading ...
Loading ...
Loading ...
operation en
31
Requirement:The laundry is pre-
pared.
→"Laundry", Page29
1. Open the door.
Make sure that the drum is empty.
2. Place the laundry in the drum.
3. Close the door.
Ensure that there is no laundry
trapped in the door.
13.5 Adding detergent and
care product
Notes
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡ Observe the information about de-
tergents and care products
→Page30.
1. Pull out the detergent drawer.
2. Pour in detergent.
→"Detergent drawer", Page18
3. If required, add the care product.
4. Push in the detergent drawer.
13.6 Starting the programme
Note:If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶ Press Start / Reload.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: "End".
13.7 Adding laundry
1. Press Start / Reload.
The appliance pauses.
Note:If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2. Open the appliance door.
3. Add or remove laundry.
4. Close the appliance door.
5. Press Start / Reload.
13.8 Cancelling the pro-
gramme
1. Press Start / Reload.
2. Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→"Programmes", Page25
3.
Remove the laundry →Page31.
13.9 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1. Start the Spin programme or se-
lect a suitable programme for
draining.
→"Programmes", Page25
2. Press Start / Reload.
13.10 Unloading the laundry
1. Open the appliance door.
2. Remove the laundry.
Loading ...
Loading ...
Loading ...