Loading ...
Loading ...
Loading ...
17
A note on pizza stones
When using a pizza stone, it is necessary
to first heat the stone (without a pizza)
for optimum results.
1. Insert the wire rack, with the spokes
facing upward, into the middle rack height
position.
2. Place pizza stone on the centre of the wire
rack so air will flow around all sides of the
stone.
3. Close the door.
4. Turn the TIME dial to the left to
reduce the time to ‘:15 MINS’. The time
is displayed as the bottom figure on the
LCD screen. The preset CONVECTION
and FROZEN settings will also be
displayed.
5. Press the START/CANCEL button to
activate the PIZZA function. The button
backlight will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange. The LCD screen will
indicate a blinking ‘PREHEATING’.
6. Once the oven has reached the set
temperature, the temperature alert
will sound.
7. After the PREHEATING alert has sounded,
the timer will automatically begin to count
down.
8. At the end of the cycle, the oven alert will
sound. The START/CANCEL button
backlight will go out and the LCD screen
will illuminate blue.
9. Open the oven door and carefully place
frozen pizza on the heated pizza stone.
When cooking fresh pizza, carefully
remove the entire wire rack with pizza
stone using insulated oven mitts. Place
on the counter and transfer the fresh
pizza dough onto the heated stone before
placing back into the oven.
10. Select desired PIZZA setting and press
the START/CANCEL button to re-start
the PIZZA cycle.
COOKIES FUNCTION
The COOKIES function is ideal for baking
homemade or commercially prepared
cookies and other baked treats.
Ready-to-bake crescent rolls, cinnamon
scrolls, biscuits and strudels are ideally
baked using this function.
1. Insert the wire rack, with the spokes
facing upward, into the middle rack
height position.
2. Close the oven door.
3. Turn the FUNCTION dial until the
indicator on the LCD screen reaches
the COOKIES function. The top figure
on the LCD screen indicates the preset
temperature of 175°C, while the bottom
figure indicates the preset time of
‘:11 MINS’. The preset CONVECTION
setting will also be displayed.
4. The baking temperature and time can be
adjusted before or during the cookie cycle.
a) The baking temperature is displayed as
the top figure on the LCD screen. Turn
the TEMPERATURE dial to adjust the
baking temperature from 50°C/120°F |
to a maximum of 230°C/450°F.
b) The baking time is displayed as the
bottom figure on the LCD screen.
Turn the TIME dial to adjust the time
up to 1 hour.
Loading ...
Loading ...
Loading ...