Loading ...
Loading ...
Loading ...
ATTACHINGANDREMOVING THE VACUUM BAG
Attaching
1. Attach the vacuum bag to the vacuum bag hook on
the blower/vacuum tube (Fig. 3)
INSTALLING THE HARNESS
_b WARNING: To avoid serious personal injury, I
never attempt to start the unit when standing I
and the unit clipped to the shoulder strap. I
Always follow the starting procedures as
described in the Operation section.
1. Push the strap through the center of the buckle.
2. Pull the strap over the cross bar and down through
the slot in the buckle (Fig. 6).
Hook
Fig. 3
2. Slide the vacuum bag tube over the debris exhaust
tube on the housing. Push the tube until the latching
tabs on both sides click into place, securing the bag
on the unit (Fig. 4). Clip
,
Fig. 6
Snap the clip on to the support fitting (Fig. 7).
Support Fitting
/
\
\
Fig. 4
Removing
1. Press the latching tabs on both sides of the vacuum
bag tube and pull the vacuum bag down from the
unit (Fig. 5).
2. Detach the vacuum bag from the vacuum bag hook.
Latching Tabs
PRESSIN
IN
4.
Clip
Fig. 7
While standing in the operating position adjust length
to fit the operator's size. Pull tab to lengthen, pull
strap to shorten (Fig 8).
Fig. 8
9
Loading ...
Loading ...
Loading ...