Loading ...
Loading ...
Loading ...
Cleaning and Applying Detergent
To apply detergent, follow these steps:
1. Review use of spray tips.
NOTICE
NOTICE
pressure spray tips (Green or Red).
Check that high pressure hose is connected to
spray gun and pump. Turn on water.
NOTICE
the engine.
• Starting the engine without all the hoses connected and
without the water turned ON could damage the pump.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
5. Start engine following instructions How to Start
Your Pressure Washer.
6. Apply detergent to a dry surface, starting at lower
using long, even, overlapping strokes.
washing and rinsing. Reapply as needed to prevent
surface from drying. DO NOT allow detergent to
dry on (prevents streaking).
Pressure Washer Rinsing
For Rinsing:
2. Select and install desired high pressure spray tip
following instructions How to Use Spray Tips.
3. Keep the spray gun a safe distance from the area
you plan to spray.
then check surface for damage. If no damage
is found, you can assume it is okay to continue
rinsing.
with same overlapping strokes as you used for
cleaning.
Cleaning Detergent Siphoning Tube
clean water.
2. Remove high pressure spray tip from nozzle
following instructions How to Use Spray Tips.
5. Shut OFF engine following instructions How to
Stop Pressure Washer
6. ALWAYS point spray gun in a safe direction push
release retained high water pressure.
Automatic Cool Down System (Thermal
Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the
spray gun, circulating water in the pump can reach
discharging the
warm water onto the ground.
WARNING Chemical Burn Hazard.
death or serious injury.
• DO NOT use caustic liquid with pressure washer.
• Use ONLY pressure washer safe detergents/soaps.
Follow all manufacturers instructions.
WARNING
cause you to fall resulting in death or
serious injury.
WARNING The high pressure stream of water
that this equipment produces could cut
through skin and its underlying tissues,
amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected, which
could result in serious injury.
• Keep high pressure hose connected to pump and spray
gun while system is pressurized.
• ALWAYS point spray gun in safe direction, press red
pressure, every time you stop engine.
Loading ...
Loading ...
Loading ...