Loading ...
Loading ...
Loading ...
Troubleshooting en
57
Fault Cause and troubleshooting
flashes. Door is not closed.
1. Close the door.
2. Press Start / Reload / Pause
to start the pro-
gramme.
All other error codes. Malfunction
▶
Call the after-sales service.
→"Customer Service", Page66
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The programme does
not start.
You have not pressedStart / Reload / Pause .
▶
Press Start / Reload / Pause
.
Door is not closed.
1. Close the door.
2. Press Start / Reload / Pause
to start the pro-
gramme.
Childproof lock is activated.
▶
→"Deactivating the childproof lock", Page40
- Ready In + is activated.
▶
Check whether - Ready In +
is activated.
→"Buttons", Page23
Laundry is caught in the door.
1. Open the door again.
2. Remove any trapped laundry.
3. Close the door.
4. Press Start / Reload / Pause
to start the pro-
gramme.
The door cannot
beopened.
is activated.
▶
Continue the programme by selecting
Spin or
Drain and pressing Start / Reload / Pause .
→"Resuming the programme when the programme
status is Rinse Hold", Page39
The temperature is too high.
▶
Wait until the temperature has dropped.
▶
→"Cancelling the programme", Page39
Loading ...
Loading ...
Loading ...