Owner's Manual - Page 8

For DBLR333EE1WW. Also, The document are for others GE - General Electric models: DBLR333*, DBSR453*, DBXR463*, DHDSR45*, DJXR433*, DLSR483*, DRSR483*, DS4500*, DVLR223*, DWSR483*, DWXR483*, DX2300*, DX4500*, EED4500*, EGD4500*

Loading ...
Loading ...
Loading ...
Aboutthe dryerfeatures.
WRINKLE CARE Wrinkle Care Option (on some models)
Use this option to minimize the wrinkles
in clothes. It provides aI)I)ro_mamly
15 minutes of no-heat rambling after
the clothes are dry.
This option can OlflVbe used with the
COTTONSand EASYCAREc_cles.
If wm are using the CYCLESIGNAL knob
and wm select the WRINKLE CAREoption,
a signal will sotlnd at the end _ff the drying
time and several times during the WRINKLE
CAREcvcle. This will remind you that it is
time to remove the clothes.
If WRINKLE CAREis not on, the (h_er will
stop once the timer reaches the WRINKLE
CAREmark on the cycle dial.
SIGNAL
MEDIUM
Cycle Signal Option (on somemodels)
This signal will SOtlndjtlst before the end
_ff the cycle to remind you to remove the
clothes. On some models the signal sotmd
level cmmot be a(!iusted.
If you selected the WRINKLE CAREoption,
the signal will sotmd at the end (ff the
(hTing time and will sotmd several times
during the WRINKLECAREcycle. This will
remind you that it is time to remove the
clothes.
NOTE:
Remove garments promptly at the sound
of the signal Place clothes on hangers so
wrinkles won't set in.
Usethe Cycle Signal especially when
drying fabrics like polyester knits and
permanent press. These fabrics should
be removed so wrinkles won't set in.
Automatic Cycle Signal (onsome models)
At the end el each cycle, there is A reminder signal will sotmd periodically
approximately 15 minutes of no-heat dm_ing this time to remind wm to remove
tumbling alter the latmdrv is drx: the latmdrx:
Loading ...
Loading ...
Loading ...