Loading ...
Loading ...
Loading ...
23
CONTROLS AND STARTING A WASH - CK MODELS
To start a wash programme
1 Press and hold
to turn the dishwasher on.
2 Check that the wash programme displayed is the one you would like to use. If not, see
section ‘Changing the wash programme.’
3 Once the display shows the programme you would like to use, press
to start. The
display will show the approximate time remaining and the stage of the wash.
Note: the dishwasher will remember the last programme used.
To pause and restart a wash programme
1 Press to pause the programme. The programme status (eg ‘Wash’) will flash while the
dishwasher is paused.
2 Open the door very slowly.
IMPORTANT!
There is a risk of being sprayed with hot water. Do not fully open the door until the
spray arms have stopped rotating.
3 Load, remove, or rearrange any dishes if needed.
4 Press to restart the programme.
If the dishwasher is not restarted within 7 minutes, it will then beep every few seconds
until the cycle is restarted.
Changing the wash programme
Note: The dishwasher will remember the last programme used.
1 Press
to turn the dishwasher on.
2 Press Program to scroll to the desired wash programme.
●
The display will show the wash programme time.
3 Select a wash option (optional)
●
Press the ‘Options’ buttons to scroll between ‘Intensive’, ‘1/2 Load’ or off
(see ‘Selecting Wash options’).
4 Press to start the wash programme.
At the end of the programme the dishwasher will beep. The Clean indicator will remain
lit and the display will show . After 30 seconds the display will turn off.
WASH PROGRAMME DESCRIPTION
Auto Senses the optimal wash programme for your dishes
Heavy A wash for heavily soiled dishes
Normal A wash for your everyday dishes
Normal Eco Helps you save energy and water for normal
soiled use
Fast A fast wash for lightly soiled dishes
Gentle For all your heat sensitive dishes
Hygiene A wash for sanitising your dishes
Rinse Prevents food from drying on dishes
Loading ...
Loading ...
Loading ...