Loading ...
Loading ...
Loading ...
10
Unscrew the screws at top of back panel (3). Lift panel up and pull out at the bottom. Then slide panel
out of the cabinet. You will now have access to the pump, float valve and water distributor spreaders.
Draining the Cooler Tank
Unscrew drain cap from drain assemble and drain away water. You may tip the unit carefully to the
drain side to help drain all the water out.
Removal and Replacement of Xel50 Cooling Media.
The cooling pads are made from a special resin impregnated craft paper specially designed for
evaporative cooling. They will last many years if maintained properly and water quality is maintained.
It is not necessary to remove the pads to clean them.
Inspect the pads for deposits of calcium on the air entering side. If the flute cells are clogged or the
pad is very heavy it may be time to change the media. New OEM Xel50 media can be purchased where
you bought the cooler. Follow these steps for replacing the pads.
1. With access panel removed, simply pull off the pad retainer disc from the pad pin. Older models
may have a pushed on pin that will need to be pulled away using pliers to grasp disc and pull
Loading ...
Loading ...
Loading ...