Loading ...
Loading ...
Loading ...
Assembly
1. Lift the stand upright. Assemble the motor shaft (6 & 10) onto the metal stand
(12) by fastening xing screw #2 (11).
2. Unscrew the rear guard securing nut (4) from the motor shaft (6) by turning the
nut anti-clockwise.
3. Mount the rear guard (5) to the motor unit (7) as aligned with the three
positioning pins on the motorshaft. Secure the rear guard with securing nut (4)
by turning it ina clockwise direction.
4. Assemble the fan blade (3) to the motor shaft (6) and tighten the xing screw #1
(2).
IMPORTANT: Ensure the xing screw (2) is tightened on the surface of the motor
shaft (6).
5. Attach the front guard (1) to the rear guard (5) and close all clips and lock the
safety screw at the bottom of the guard.
1. Connect the plug to a power supply and switch on the power.
2. Switch the fan ON by rotating the speed switch (8) at the rear in clockwise
direction. This switch is also used to adjust the fan SPEED.
3. The airow direction can be adjusted upward/downward by simply lifting the
motor unit or rear guard UP or DOWN.
NOTE: Only adjust the fan head when the unit is OFF. Be careful not to insert your
ngers through the guard.
4. Turn the speed control switch (8) repeatedly to adjust the fan SPEED from HIGH
"3” - MEDIUM “2”- LOW “1” in sequence. Turn the switch in and anti-clockwise
direction to turn OFF.
5. Oscillation -To activate the oscillationfunction, push down the oscillation knob
(9). Pull up the oscillation knob (9) to stoposcillation at the desired direction of
airow
6. Turn the switch anti-clockwise to turn the fan OFF.
Operation
7
Loading ...
Loading ...
Loading ...