Loading ...
Loading ...
3
Installing the Splash back
1. Fix handle using fixing screws and washers supplied.
2. Fix mounting screws and cup washers to the wall using the dimensions given below. Mounting to a stud
is recommended. However, if fitted to other wall linings (plasterboard, concrete etc) suitable wall fixings
will be required (not supplied).
A Distance from the bench top to the lower fixing screw
107mm flush fit between the bottom surface of the splash back and the bench top
110mm allows a 3mm gap between the splash back and bench top if sealing is required
3. Hang splash back from the cup washers.
4. Seal the splash back to the wall using suitable approved sealant. (Check with your local council for
building regulations).
Loading ...
Loading ...