Loading ...
Loading ...
Loading ...
I NSTALLATI O N
Door and Drawer Removal
Some installations require door/drawer removal to
transport the refrigerator to its final location.
.
.
Remove center hinge pin with a 5/,6"
hex head driver and retain hinge pin
for later use.
Remove Phillips screws to remove
right and left hinges and retain all
screws for later use.
Remove both stabilizing brackets with 3/;, hex head
driver and retain screws for later use.
Pullout Freezer Drawer
(select models)
1. Unplug power cord from power source.
2. Remove toe grille and bottom hinge
cover(s) (see page 4).
3. Remove top hinge cover from
refrigerator door by removing Phillips
screw and retain screw and cover for
later use.
4. Unscrew _/,5"hex head screws from t_
top hinge to remove hinge and retain
all screws for later use.
5. Lift right side refrigerator door from
center hinge pin. Remove door
closure from center hinge pin on
. right
the right side and retain for later s_de
use. ---.'_-_I door
osure
6. Disconnect wire harness on top
of left side refrigerator door top
hinge. ..
Release two-pin connector by
pressing junction point with a
flat blade screwdriver or
fingernail.
Green ground wire remains
attached to the hinge.
7. Unscrew _/,5"hex head screws from
top hinge to remove hinge and retain ,
for later use. ._
Lift left side refrigerator door, along
with top hinge, from center hinge pin. "
To Remove:
1. Pull drawer open to full extension.
2. Tilt the lower basket forward and lift to remove.
3. On each white drawer
bracket is a basket cradle
with two snap attachments.
To release each cradle,
unlatch the snaps by
pushing them inward, away
from the side bracket. Lift
the cradles off of the rails.
4. Remove Phillips screw
from each of the drawer
slides (select models).
Loading ...
Loading ...
Loading ...