Summit DW245NTADA 24 Inch Panel Ready Built-In Fully Integrated Dishwasher

Installation Instructions - Page 4

For DW245NTADA. Also, The document are for others Summit models: DW242WADA, LDW24WA, DW242W, ADADW24W, DW243BADA, LDW24BA, DW243B, ADADW24B, LDW24NTA, DW245NT, ADADW24NT

PDF File Manual, 17 pages, Read Online | Download pdf file

DW245NTADA photo
Loading ...
Loading ...
Loading ...
4
INTRODUCTION
Please read this user manual and particularly the safety instructions completely and carefully.
They will save you time and effort and help to ensure optimum dishwasher performance.
Be sure to observe all listed warnings and cautions. Look particularly for the icons with
exclamation marks inside. The information icon will also provide important references.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in injury. It
may also be used to alert against unsafe practices.
NOTICE: Indicates a potentially hazardous situation which, if not avoided, may result in damage
to the dishwasher, the tableware, the equipment or the environment.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using the dishwasher, follow basic precations. Read all instructions before
using the dishwasher! Save these operating instructions and pass them on to any future user.
When installing the dishwasher, follow basic safety precautions, including the following:
The dishwasher could only be converted from cord-connected to permanently connected by an
authorized service representative. (If needed, contact your dealer to schedule an authorized
service agent for conversion with an appropriate conversion kit/)
Installation and repair should be performed by a qualified installer. Work by unqualified persons
could be dangerous and may void the warranty.
The dishwasher should be installed by an insured licensed plumber, contractor or trained
installer. Installation performed by persons other than this could result in improper installation
and property damage.
Do not operate the appliance if damaged, malfunctioning, partially disassembled or if it has
missing or broken parts.
Also follow the safety instructions of the user manual.
To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that the
dishwasher is completely enclosed at the time of installation.
Only connect the dishwasher to the power supply when all installation and plumbing work is
complete
If the dishwasher is installed in a location that experiences freezing temperatures (e.g. in a
vacation home, cabin, etc.), you must drain all the water from the dishwasher's interior. Water
system ruptures that occur as a result of freezing are not covered by warranty
Dishwasher must be secured to adjacent cabinetry using the brackets provided. Failure to do this
may cause damage to property or bodily injury
Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.
The dishwasher is designed for an electrical supply of 120 V (volts), 60 Hz (hertz), AC,
connected to a dishwasher dedicated, properly grounded electrical circuit with a fuse or breakers
rated for 15 amperes. Electrical supply conductors shall be a minimum of #16 AWG copper wire
rated at 75 °C (167 °F) or higher. These requirements must be met to prevent injury and
machine damage. Consult a qualified electrician if in doubt.
This dishwasher includes heating element. Do not touch the heating element during or
immediately after use
Do not use any extension cord or portable outlet device to connect the dishwasher to a power
supply.
Ensure that any plastic wrappings, bags, small pieces etc. are disposed of safely and kept out of
the reach of children. Danger of suffocation!
Loading ...
Loading ...
Loading ...