Loading ...
Loading ...
Loading ...
aXis CONTROLLER HOME STANDBY GENERATOR
INSTALLATION
31
House
Icon for house receiving power
HSB
The HSB icon will indicate power when the generator is the source
of power.
aXis CONTROLLER MODULE INFORMATION ICONS
The information icons are located at the bottom right side of aXis
Controller icon touch pad.
Hour Meter
The hour meter keeps track of all running time of the HSB. This
includes run time during a utility power outage and during the
weekly exercise cycle. This provides the owner with a record
of operating time which is useful in keeping track of scheduled
maintenance intervals. Refer to the scheduled maintenance chart
in your Owner’s Manual for specific maintenance. The hour meter
can’t be reset. The initial time registered on the meter when first
started up (installed) will reflect the factory test time, this is a
normal industry standard. The hour meter only reflects hours, it
does not reflect RPMs or any other function.
Exercise Icon
The BLUE icons will be lit when the HSB is performing the weekly
exercise period. Refer to “Setting Exercise Time” to establish the
weekly exercise period. When the exercise period is complete the
icon will turn off and the HSB will resume its standby monitoring.
aXis CONTROLLER MODULE FAULT ICONS
Low Oil
The RED icon will be lit when the engine oil level drops below the
safe operating level. When this fault is detected, the HSB will shut
down and re-start will be disabled. RED icon on the controller
module and exterior LED will be lit.
Check the oil level. The oil level should be at the FULL mark,
if necessary, add oil. DO NOT overfill. Inspect the unit for a
possible oil leak, if a leak is discovered, contact Champion or your
nearest Authorized Champion Dealer. Follow the reset procedures
contained in the manuals specific to your model to clear and
correct.
High Engine Temperature
The RED icon will be lit if the engine operating temperature
exceeds the factory preset limits. If excessive operating
temperature is detected, the HSB will shut down and re-start
will be disabled. The RED icon on the aXis Controller module and
exterior enclosure LED will be lit.
Loading ...
Loading ...
Loading ...