Loading ...
Loading ...
Loading ...
Most laundering problems are easily time and money by helping you avoid
solved if you understand the cause, unnecessary service calls.
Using the tables below will save you
Problem
Not Drying
Satisfactorily
8olution
Clean tint screen.
Run dryer for 5-10 minutes. Hold
hand under outside exhaust hood to
check air movement. If you do not feet
air moving, clean exhaust system of
tint or replace exhaust vent with rigid
or flexible heavy metal vent
(see "INSTALLATION',' Section D).
Exhaust vent is crushed Replace with rigid or flexible heavy
or kinked, metal vent
(see "INSTALLATION',' Section D).
One fuse is blown or circuit Replace fuse or reset breaker.
breaker is tripped. The dryer
will appear to operate, but you
will not get any heat.
Gas valve on supply line Open all valves.
is closed.
Timer or the temperature Select the right cycle for the types
control is set on AIR DRY. of garments being dried
(see "OPERATION").
Load not contacting the Level dryer
sensor strips and automatic (see "INSTALLATION',' Section B).
cycle ending early.
Fabric softener sheets Use only one softener sheet per load
blocking outlet grill, and only use it once.
Dryer located in room with Move dryer where it can operate in
temperature below 45°F. ambient air temperatures above 45°F.
Large amount of moisture Expect longer dry times with items
in the toad. that hold more moisture (cottons).
Cold rinse water used. Expect longer dry times, but you are
saving energy and reducing wrinkles.
Load too large and bulky to Separate toad to tumble freely.
dry quickly.
Dryer Will Power cord not firmly plugged Plug power cord into a live circuit.
Not Run into a live circuit with proper
voltage.
Fuses blown or circuit Replace fuses or reset breakers.
breakers tripped.
Possible Cause
Lint screen is clogged with tint.
Restricted air movement.
Exhaust vent or outside
exhaust hood is clogged
with tint.
35
Loading ...
Loading ...
Loading ...