Loading ...
Loading ...
Loading ...
23
4
Attach bracket with
mounting hardware provided.
22
1
Measurement (A)
Measurement (A)
M
e
as
u
r
e
m
e
n
t
(
A
)
+1/4”
+
1
/
4
”
(.64 cm)
(
.
6
4
c
m
)
Measurement (A)
+1/4” (.64 cm)
X
2
Measure from floor to bottom
of the anit-tip opening located on the back of range.
This will be measurement (A).
Locate anti-tip bracket on rear wall with the top left corner at
measurement (A) plus 1/2” (1.3 cm) from the floor and “X” from
where the right side of range (facing range) is to be located.
WARNING
TIPPING HAZARD
To reduce the risk of property
damage or personal injury;
install anti-tipping device
provided in accordance with
the installation instructions
in this document. Device
must be engaged properly to
prevent product from tipping
over.
Anti-tip Device Installation (Wall Mount)
Range
Width
Dimension
36” 24-5/8” (62.5 cm)
48” 22-3/4” (57.8 cm)
Dmenson
23-1/2” (59.7 cm)
4-1/4” (10.8 cm)
ii
VGR “X” VDR “X”
3
Mark and drill holes where bracket will be located.
Installation
Installation
1
16”
1
6
”
(21.6 cm)
(
2
1
.6
c
m
)
16”
(40.1 cm)
Ø 1/8”
Ø
1
/
8
”
(.32 cm)
(.
3
2
c
m
)
Ø 1/8”
(.32 cm)
1-1/2”
1
-
1
/
2
”
(3.8 cm)
(
3
.
8
c
m
)
2-7/8”
(7.3 cm)
1
1
2
2
Anti-tip Device Installation (Floor Mount)
2
1
x2
3
1
2
4
Locate anti-tip bracket hook on the floor 16” 40.1 cm) from side
cabinet and 2-7/8” (7.3 cm) from rear wall. Mark and
drill 1/8” (.32 cm) holes where bracket will be located.
Mount anti-tip bracket hook to floor
using screws provided.
Remove two screws from back of range.
Attach bracket to back of range using two screws.
1
Connect gas and electrical. Before placing appliance in operation,
always check for gas leaks. This must be performed by your
dealer, a qualified licensed plumber, or gas service company.
DANGER
GAS LEAK HAZARD
To avoid risk of personal injury
or death; leak testing of the
appliance must be conducted
according to the manufacturer’s
instructions. Before placing appliance in
operation, always check for gas leaks
with soapy water solution.
• DO NOT USE AN OPEN FLAME TO
CHECK FOR GAS LEAKS.
Connecting Gas & Electric
Loading ...
Loading ...