Loading ...
Loading ...
Loading ...
EN
7
Use & Care guide
FUNCTIONS
To switch o the cooking zones:
Use the “OFF” control at the start of the slider control. If the cooking
zone is still hot, the residual heat indicator “H” will appear on the display.
CONTROL PANEL LOCK
To prevent the hob from being switched on accidentally, press and
hold down the OK/Control Lock-3sec control for 3 seconds. An acoustic
signal and a light above the symbol will switch on to indicate that the
lock is in place.
The control panel is locked except for the switch o function.
To switch o the control lock, repeat the activation process. The light
will switch o and the hob controls are again active.
PAUSE
The Pause function interrupts hob operation for about 30 seconds.
During this time, it is possible to clean the surface around the controls
without altering any presets. After this time, the hob will go back to
operating as normal.
TIMER
The timer can be used to set a maximum cooking time of 99 minutes.
The timer setting can be used on each cooking zone, following the same
procedure. The timer always shows the time set for the selected area, or
the shortest remaining time.
To start the timer:
1. Switch on the required cooking zone by pressing any part of the
slider.
2. Press the or control to set the required time. The display
will read “00”.
When the set time is up, an acoustic signal will sound and the cooking
zone will switch o automatically.
To change the timer setting:
1. Press the slider control for the cooking zone.
2. Press the or
control to change the required time.
To switch o the timer:
Press the
and controls together until the timer switches o.
FLEXIBLE AREA
Select the “Flexible Area” control to control two cooking zones at the
same time. It is possible to use both slider controls at the same time to
control the power.
Using this function is ideal to increase the cooking zone with the
advantage of positioning cookware as needed within the selected area.
Ideal for using oval or rectangular pans or grill pans.
HORIZONTAL FLEXIBLE AREA
This can be used to control the rear cooking zones at the same time.
Both central controls can be used at the same time to control the power.
Covering the whole activated area will achieve the maximum available
power.
To switch on the Flexible area function:
1. Switch on the hob.
2. Press the control for the Horizontal Flexible area. Both areas will be
connected and the displays will read “0”.
3. Using the slider, select the power level you require.
To switch o the Flexible area function:
Press the control for the Flexibile area that is functioning: the cooking
zones will go back to operating individually.
The Flexible area function will also switch o when the hob switches o
at the end of cooking.
For the best results, always cover at least one or more points marked on
the glass surface or inside the Flexible area.
SPECIAL FUNCTIONS
6
th
SENSE
With the 6
th
Sense control, you can start the special functions.
1. Put the pan in place, switch on the hob and select the chosen
cooking area by touching the slider.
2. Press the “6
th
Sense” control. The cooking zone display will read “A”
(automatic).
3. The indicator for the rst special function available for the selected
cooking zone will switch on.
4. Select the required special function by pressing the “6
th
Sense” control.
5. Press the control to conrm the required function .
Once activated, each special function can be used to set the optimim
cooking level by selecting the presets and adjustments (MIN-MED-
MAX).
OFF
P
18
MaxMin Med
The function automatically suggests an intermediate level by default.
During use, if necessary, it is possible to move to a lower/higher level
according to cooking progress, to optimise time and condition (e.g.,
boiling level of water).
P
Max
18
MinMed
OFF
P
Max
18
Min Med
OFF
P
Max
18
Min Med
OFF
P
Max
18
Min Med
Loading ...
Loading ...
Loading ...