Loading ...
Loading ...
Loading ...
11
12. Tip the whole assembly so that
the unit is standing on its base.
13. Loosen the height adjustment
knob on the extension tube
and pull up the inner extension
tube to the desired height (See
Fig. 11). Fully tighten the height
adjustment knob to hold the
inner extension tube in place.
Fi g. 11
14. Remove the black PVC
protective sleeve from the motor
head shaft. Unscrew the 4 small
screws situated on the motor
head (See Fig. 12).
Fig. 12
15. Separate the blades, front
and rear grilles by opening the
securing clips all around the front
grille and undoing the twist tie
away from the fan blades.
16. Thread the motor head through
the centre hole of the rear
grille, placing the rear grille into
position. Make sure that the
carry handle on the back of the
rear grille is located above the
motor head.
17. Ensure the rear grille mounting
holes are aligned with the
mounting holes on the motor
head and fix the grille into
position with the 4 small screws
provided (See Fig. 13). Make
sure that the rear grille has not
slipped off the mounting holes
before tightening the screws.
Fig. 13
NOTE: When positioning the
rear grille on the motor shaft,
always ensure the carry handle
on the grille is positioned in the
upright position.
Loading ...
Loading ...
Loading ...