Loading ...
Loading ...
Loading ...
9 | P a g e
3.2 ELECTRICAL CONNECTION
Warning: Do not use extension cords
The cooler works on single-phase voltage (220-240V/50Hz) power supply. To switch on the
cooler, insert the plug into the outlet.
Ensure that: .
When the cooler is operating, check that the supply voltage is not dropping or increasing
under/over +10% the rated voltage (195 Volts to 253 Volts)
*Ensure the cooler is connected to correct voltage prior to plugging it in; there is a
description to identify the correct voltage on rear of the cooler.
*The vent should not be blocked when fridge is working (front Grill).
*Avoid any water dropping or leaking into, or on top of the cooler. It could cause damage to
the internal workings and is potentially dangerous.
*Danger-Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical
devices to defrost refrigerator. Do not puncture refrigerant tubing.
*Danger-Risk of fire or explosion. Flammable refrigerant used. To be repaired only by
trained service personnel. Do not puncture refrigerant tubing. Consult repair manual/owner's
guide before attempting to service this product. All safety precautions must be followed.
The manufacturer is not responsible for damages or accidents arising from the misuse or
disregard of electrical laws relevant to the country where the cooler is used.
Loading ...
Loading ...
Loading ...