Loading ...
Loading ...
Loading ...
197
1.800.735.4328 | THERMADOR.COM
WARMING DRAWER 30-INCH CONVECTION
Model: WDC30E
WARMING DRAWERS
30-INCH CONVECTION WARMING DRAWER AND
CUTOUT DIMENSIONS
1" minimum space
is recommended
between the bottom
of the oven and the
top of the Warming
Drawer, if the Warming
Drawer is installed
below a single oven.
22
3
/4"
22"
11
1
/4"
29
3
/4"
28
1
/2"
24"
10"
INSTALLATION OPTIONS
WALL-MOUNTED INSTALLATION
Thermador Warming Drawers may be installed below
any Thermador Single or Double Built-in Oven. A
minimum space of 1" is recommended between the
bottom of the oven and the top of the warming drawer.
Refer to the built-in oven section for additional details.
UNDER-COUNTER INSTALLATION
Thermador Warming Drawers may also be installed
below any Thermador Electric or Non-professional Gas
Cooktop as long as there is no contact between the
bottom of the cooktop and the top of the warming
drawer. When installing below a Thermador Induction
Cooktop, a minimum 1" air gap must be maintained
between the bottom of the cooktop and the top of the
warming drawer. When installing below a Thermador
Professional Rangetop, a minimum 2
3
/4" air gap must
be maintained between the bottom of the cooktop
and the top of the warming drawer. Refer to the
appropriate cooktop or rangetop section for
additional details.
FRONT PANEL
This Thermador Warming Drawer requires a front
panel. You may choose from one of our coordinating
front panel accessories or build a custom drawer front
panel to coordinate with your cabinetry. Custom panels
must meet the following requirements:
– Have a handle
– Have the dimensions shown below
– Have a minimum thickness of
3
/4" (19 mm)
– Have all edges finished
– Be capable of withstanding a temperature of
158°F (70° C)
The cabinet base must be flat and capable of
supporting a weight of at least 150 lbs. (75 kg).
CUSTOM FRONT PANEL
Loading ...
Loading ...