Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
55
Miele shall not accept warranty claims
for any functional defects or damage
caused by inadequate exhaust
ducting.
Silencer
To reduce noise levels even further, a
silencer (optional accessory) can be
installed in the exhaust ducting.
In extraction mode, the silencer not only
reduces noise from the fan outside the
house, but also sounds originating
outside reaching the kitchen through
the exhaust ducting (e.g. traffic noise).
For this reason, the silencer must be
positioned as close as possible to the
ducting exit.
Electrical connection
Installation, maintenance or
repair work by unqualified persons
could be extremely dangerous. The
manufacturer cannot be held liable
for unauthorised work.
All electrical work should only be
undertaken by a suitably qualified
and competent electrician in strict
accordance with current national and
local safety and building code
regulations (BS7671 in the UK).
This cooker hood must only be
connected to a properly installed power
supply.
The electrical system must comply with
VDE0100 (BS 7671 in the UK).
For increased safety you should protect
the appliance with a suitable Residual
Current Device with a current trip of
30mA.
A suitable means of disconnection must
be provided on site for each pole.
Suitable means of disconnection
include switches with an all-pole
contact gap of at least 3mm. These
include circuit breakers, fuses and
contactors (EN60335).
The relevant connection data can be
found on the data plate (see “After
sales/Warranty”). Ensure that this data
matches the voltage and frequency of
your household power supply.
If a flexible connection cable is being
used to connect the appliance to the
power supply, the cross-sectional area
of the individual leads must be between
0.75mm² and 1.5mm².
Loading ...
Loading ...
Loading ...