Loading ...
Loading ...
Loading ...
Installation
The cabinet should be installed with a very slight tilt
(about 1/2") downward toward the outside
Adjust the bolt and the nut of Sill Support @ for
balancing the cabinet.
Attach the cabinet to the window stool by driving
the screws @ (Type B: Length 16mm (5/8 inch)
and below.) through the front angle into window
stool.
'_ Pull each Frame Curtain Q fully to each window
sash track, and repeat step 2.
Screw(Type B) _)
Sill Support(_
Sill Support (_)
iii
sh track
_ Front Angle
Screw(Type B) @
Attach each Frame Curtain(_ the window sash using
screws O (Type C).
CAUTION: Do not drill a hole in the bottom
pan. The unit is designed to operate with
approximately 112" of water in bottom pan.
There is no need to add water if the pan is
dry.
J
a
Slide the unit into the cabinet.
_lb CAUTION: For security purpose, reinstall
screws (Type A) at cabinet's sides.
Screw(Type A)
Screw
(Type A)
Cut the Foam-Strip® to the proper length and insert
between the upper window sash and the lower
window sash.
Owner's Manual 15
Loading ...
Loading ...
Loading ...