Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
TIMER: DELAY STOPISTART FEATURE:
®
YOU WiLL SEE HOW MUCH TiME IS CHOSEN:
®
DO THIS:
PRESS TIMER
BUTTON
THEM DO THIS:
PRESS UP (A) OR
DOWN (V) BUTTON
CHECK FILTER FEATURE:
LIGHT On
Note: For Delay Stop the unit must be in the On position.
To adjust timer setting tap or hold the UP arrow( ) Down arrow( )
to change delay timer at .5 hour increments up t_10 hours, ther'r_
at 1 hour increments up to 24 hours. The controt wilt count down
the time remaining until start (8,7.5,7 ere.). The Delay Start mode
automaticaIIy selects cooIing with maximum Fan Speed. The
temperature maintained wiIt be the same as previously set, To
change the set temperature, Press COOL" then Up or Down
arrows untit the desired temperature is indicated on the display.
After 5 seconds, the control wiII automatically change the disptay
back to the hours remaining until the unit will start/stop. Tuming
the unit "ON" or 'OFF" at any time wiII cancet the Delay Start/
Stop function.
The Delay Start/Stop Feature witt work until the unit either starts
or stops, Once that happens the above steps have to be repeated
again.
YOU WILL SEE:
LIGHT On
FAULT CODES
Note: This feature is a reminder to clean the Air Filter (See Care
and Cleaning) for more efficient operation and cooling. The LED
(light) wilt illuminate after 250 hours of operation. To reset after
cleaning the fiIter, press the Check FiIter" button and the light
wilt go off.
Ifthe display reads "AS" a sensor
has faiIed. Contact your Authorized
Frigidaire Serivice Center
If the dispIay reads "ES", a sensor
has faiIed. Contact your Authorized
Frigidaire Service Center
Loading ...
Loading ...
Loading ...