Loading ...
Loading ...
Loading ...
REMOVING AND REPLACING REFRIGERATOR DOORS (models with water dispenser)
1. Removing Refrigerator Door
NOTE: Handle appearance may vary,
IMPORTANT."Before you begin, turn the refrigerator OFF and unplug it, Remove food and any bins from doors.
I,"Left Door
• Loosen the screws and remove the cover on back side (see figure A).
• Disconnect water supply tube by pushing back on the disconnect ring (3),
• Loosen the cover screw (1).
• Disconnect door switch wire (2),
• Pull out the tube (4).
[] CAUTION: If a tube end is deformed or worn out, cut the damaged portion away.
• Disconnect wire harness (5),
, Loosen screws (6) and lift off the top hinge (7).
• Place the door on a non-scratching surface with the inside up,
[] CAUTION: When removing top hinge, be careful that the door does not fall forward.
I_ Right Door
• Loosen the cover screw (1).
• Disconnect door switch wire (2),
• Disconnect wire harness (4).
• Remove the ground screw (8),
• Loosen screws (6) and lift off the top hinge (7).
, Place the door on a non-scratching surface with the inside up,
, Y ;?
12
Loading ...
Loading ...
Loading ...