Loading ...
Loading ...
Loading ...
9. Installthetwo#8-18x 1-3/8"screwsfromtheliterature
packageinthetopcorners,asshown.Aligntopedgesof
fullfrontpanelandconsole;tightencornerscrews.
2 screws
top
edges
1-3/8"screw
10. Tighten the two side screws reinstalled in Step 8.
11. Reinstall and tighten the three remaining side screws.
Custom panel dimensions
IMPORTANT:You need to know what control panel is on
your dishwasher before you order your custom door panel.
For dishwashers with the control panel shown below:
(models KUDSO3FTPA and KUDUO3FTPA)
(Your model may vary slightly from picture above.)
Custom door panel dimensions are:
/
3/4" (19.1 mm)
*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe
kick, adjust the height of the wood panel accordingly. Not recommended for
toe kicks greater than 6" (15.2 cm).
Follow directions under Option #1 of "Install custom panel"
section.
For dishwashers with the control panel shown below:
(Models KUDC031T, KUDK031T and KUDL031T)
*;_;7 %,?' _d _;_ _ .... '..... _ • ......
(Your model may vary slightly from picture above.)
Custom door panel dimensions are:
23-3/8" (59.4 c "25-29/32" (65.8 cm)
3/4" (19.1 J
mm)
1/8" (3.2 mm)
*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe
kick, adjust the height of the wood panel accordingly. Not recommended for
toe kicks greater than 6" (15.2 cm).
Follow directions in Option #2 of "Install custom panel"
section.
12
Loading ...
Loading ...
Loading ...