Loading ...
Loading ...
Loading ...
Control Button Features
READ THE iNSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care Guide. OVEN TEMPERATURE CONTROL KNOB-- Use to
SELECTOR CONTROL KNOB- Use to select the Bread Proof, select the Bread Proof, Warm & Hold, or the
Warm & Hold, Bake, Convection Bake, Convection Roast, required Bake, Convection Bake, Convection Boast,
Broil or Clean Feature. Broil or Clean Temperature.
CLEAN--
Used to select
the Self-
Cleaning
cycle.
BROE--
Used to
select
broil
BREAD PROOF--
Used to set the Bread
Proof feature.
I
CONVECTION
ROAST-- Used
to select the
convection
roasting mode.
BAKE-- Used
BAKE-- Used to to select the
select the Convection bake function.
Bake feature.
Oven Light
OVEN INTERIOR
LIGHT PAD--
Used to turn
oven interior light
ON and OFF.
OVEN TEMPERATURE
INDICATOR -- This indicator
shows the current set
temperature in the oven.
,m lm
Cony Convert [imer Clo_k Probe
CONVECTION CONVERT
Used to select the Convection
T_tMoErRcaPAcDe,thUse_tu_e_ "_-....
t,me r. TheCel_nthte_Ut: _ PROBE
does not start or stop CLOCK SET PAD-- Used
cooking. PAD-- Used to set the
to set the Probe
time of day. feature.
SCROLL
PADS--
Jsed to scroll
up or down
for many
functions.
Convert feature.
Setting the Clock
The button is used to set the clock. Until the clock is set, all the other oven functions will not beavailable. The clock may
be set for 12 or24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range
is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash with "PF".
¢lo_k
When PF flashes in the display, press the button. No other button will stop the time from flashing.
To set the clock
CIo_k
1. Press the button. The control will beep once and the time of day will appear in the display.
2. To set the clock to the current time of day, press the or button to increase or decrease the time of day in 1 minute
increments, or keep the or button pressed to increase or decrease the time of day in 10 minute increments.
3. Release the button when the desired time is reached. Wait 5 seconds and the change will be accepted.
Changing between 12 or 24 hour time of day display
clo_k
1. Press and hold the button for6 seconds. The display will show either"12" (for 12 hour clock) or"24" (for 24 hourclock).
2. Press the or _ button to switch between the 12 and 24 hour time of day display.
3. Wait 6 seconds to accept the change.
Loading ...
Loading ...
Loading ...