Loading ...
Loading ...
Loading ...
On the top left side you have an inlet to
fill the ICE-Bank with water. This must be
done prior to powering it up! The trans-
parent tube reads the fill level.
The dial is a pressure regulator for the
inlet water, which should only be ad-
justed if the water is not flowing at a
speed, that fills the glass to the level
specified in the app.
The two Molex plugs are for Cold and
Sparkling water, plugged into the Top-
Brewer. These signal cables control the
valves inside the fridge individually.
The quick-fit connectors below are for
Main “Water In” from the AC Filter, Wa-
ter out and CO2.
The main power switch (Green) as well
as the AC power.
The recirculation switch is to remain on
always, controlling the pump that cir-
culates the cooling water that cools the
Fridge-space.
Loading ...
Loading ...
Loading ...