Loading ...
Loading ...
Loading ...
Sli!:; iiii;i! iii:iiiii ¸¸¸¸i!iiiii'ii ,ii ij, i!:i!: ii....
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
fiammabme on it (even after washing).
Failure to fellow these instructions can result in death,
explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Place laundry in dryer and shut door.
3. Press the POWER button. Then rotate the dial or press a
Timed Cycles button to select the desired Auto or Timed
Cycle. The indicator light for the selected Auto or Timed cycle
will glow green. The preset modifiers for the selected cycle
will glow green. Selectable options will glow amber. If an
option or modifier is unavailable with the selected cycle, the
light will not illuminate. The estimated or actual cycle time (in
minutes) will show in the display.
To use an Auto Cycle
NOTE: A light next to each feature will glow green when the
feature is selected.
Select an Auto Cycle.
Select DRYNESS LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
NOTE: Most loads may be dried using the Normal
dryness level, which is shown in bold letters on your
control panel. Normal is the energy preferred dryness
level and will use the least energy.
Select the desired Options.
To make changes during an Auto Cycle:
Press STOP once.
Adjust Dryness Level.
Fire Hazard
No washer can compmeteBy remove oil
Do not dry anything that has ever had any type of oil on
it (incmuding cooking oils).
Items containing foam, rubber, or pBastic must be dried
on a cmothesmineor by using an Air Cycme.
Failure to fo_mowthese instructions can resumt in death
or fire.
NOTE: Dryness Level selections can be made only while
using Auto Cycles. You can select a different dryness
level, depending on your load, by pressing Dryness Level
and choosing More Dry, Normal or Less Dry. Selecting
More Dry, Normal or Less Dry automatically adjusts the
sensed time needed.
More Dry
No r_a
L÷SS i_y
_IytO_SS Leve_
How Auto Dry works
SmartHeat TM improves drying performance with Auto Moisture
Sensing Plus, which advances the cycle as moisture is extracted
from clothing. A thermistor (electronic temperature sensor) and
moisture sensing strips in the dryer drum help measure the
amount of moisture in the clothes as they tumble. An electronic
control determines the load type to help save time, avoid
overdrying, and increase the accuracy of the end dryness level.
After the first 5 minutes of an automatic cycle, the estimated time
display will adjust based on the approximate load size, cycle,
dryness level selected and amount of moisture left in the clothes.
0
When the clothes have reached approximately 80_ of the
dryness level selected, the estimated time display will adjust
again, showing the final drying time. Auto Moisture Sensing Plus
takes the guesswork out of drying time and enhances fabric care.
To use a Timed Cycle
NOTE: A light next to each feature will glow green when the
feature is selected or will glow amber when the feature is
selectable.
Press a Timed Cycles button or, to select either Rack Dry
or Air Fluff, rotate the control knob to the desired cycle.
Press MORE TIME or LESS TIME until the desired drying
time is displayed. Tap MORE TIME or LESS TIME, and the
time will change by 1-minute intervals. Press and hold
MORE TIME or LESS TIME, and the time will change by
5-minute intervals.
18
Loading ...
Loading ...
Loading ...