Loading ...
Loading ...
Loading ...
7
6. Check all beams and tie channels
5. Check the rivets
Use two or more people to move the rack shelving to its nal
location.
Check that the rivets are held behind the smaller hole of the
support beam keyholes. Repeat steps 4 and 5 for each tie
channel support.
8. Move shelving
Verify that all support beams (P2) and tie channel supports
(P3) are properly assembled and rmly seated into the top and
bottom post slots.
Place the wire shelf (P1) on top of the tie channel supports (P3)
for each shelf. Make sure that the long rods of wire shelves are
at the bottom.
Two or more racks of the same height and depth can be
connected by sharing the same welded-end frame (P4)
between them.
NOTE: Ensure there are at least two shelves per rack between
each set of welded-end frames (P4).
7. Add wire shelves
9. Congure shelving
A
P3
P2
Smaller
hole
P2
P3
P3
P1
P3
P4
Loading ...
Loading ...
Loading ...