Loading ...
Loading ...
Loading ...
END OF CYCLE SIGNAL CONTROL USING WRINKLE GUARD ®
Your dryer sounds a signal when
a drying cycle is finished.
The signal is helpful when you are
drying permanent press, synthetics,
and other items. These items should
be removed from the dryer as soon
as it stops in order to prevent wrinkles.
• On some models, the volume of the
signal can be adjusted.
END OF CYCLE SIGNAL
SlGP_L OFF 61GNAL ON
PUSH TO START BUTTON
Use this control to start the dryer.
Be sure the dryer door is closed.
Opening the door stops the dryer. It
will not start again until you close the
door and press the PUSH TO START
Button. Be sure the Cycle Selector
Control (Timer) is still on a dry setting.
EVENHEAT TM WITHAUTO MOISTURE
SENSING PLUS
EVENHEAT v with Auto Moisture Sensing
Plus is the only system that uses 2 differ-
ent sensors to "understand" how fast a
load is drying and adjusts time and tem-
perature for optimal fabric care.
This cycle uses 2 moisture-sensing strips
in the back of the dryer. When the strips
no longer "feel" any moisture in the
clothes, the dryer automatically turns off
to prevent overdrying and shrinking.
COOL DOWN
Approximately 10 minutes before the end
of the AUTO DRY, AUTO MOISTURE
SENSING and TIMED DRY Cycles,
clothes are tumbled without heat to help
reduce wrinkles and make clothes more
comfortable to handle.
WRINKLE GUARD ® helps keep your per-
manent press items wrinkle free when
you don't unload the dryer promptly at the
end of the automatic cycle.
If you do not open the door at the end
of the automatic cycle, WRINKLE
GUARD ®will tumble the clothes without
heat.
• On dryers with WRINKLE GUARD ® I,
the dryer will tumble the clothes
continuously for about 30 minutes
unless you open the dryer door.
• On dryers with WRINKLE GUARD ® III,
periodic tumbling every 15 seconds will
continue for about 21/2hours unless you
open the dryer door.
• WRINKLE GUARD ® III has a
selectable ON/OFF Option. When
WRINKLE GUARD ® Ill is set at OFF, the
dryer stops after Cool Down and may be
unloaded.
The End of Cycle Signal will sound
after each period of tumbling, unless it
is off.
WRINKLE GUARD III
OFF ON
23
Loading ...
Loading ...
Loading ...