Loading ...
Loading ...
Loading ...
14 15
OPERATING YOUR BREVILLE PRODUCT OPERATING YOUR BREVILLE PRODUCT
FROZEN BUTTON
This feature activates additional toasting
time required to toast frozen bread.
To toast frozen bread:
1. Place the bread into the toasting slots.
2. Select the desired browning setting by
adjusting the browning control slide on
the front of the toaster.
3. Press the TOAST/CANCEL button
and the surround will illuminate in red
then press the FROZEN button and the
surround will illuminate in white. The
bread will automatically lower into the
toasting slots. The toasting time will
automatically increase.
4. The LIFT & LOOK™ button surround
will illuminate in white allowing you
to check on the toasting progress
and, if necessary, cancel the cycle by
pressing TOAST/CANCEL button when
the desired toast colour is achieved.
Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination.
5. As the toasting stops and the carriage
rises, the TOAST/CANCEL button
surround will flash and the LED toasting
progress indicator will cease flashing.
The LED toasting progress indicator will
re-illuminate to the previously selected
browning setting.
6. Once the toasting cycle has finished
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound. Remove the toast. The
TOAST/CANCEL button surround will
re-illuminate in white for up to
30 seconds, ready for the next toasting
cycle. The FROZEN button surround
will remain illuminated and should be
pressed once to cancel if a subsequent
toasting function other than frozen
bread is required. The FROZEN button
surround will cease to illuminate after
30 seconds or when the appliance is
switched off at the power point. The
FROZEN button works for frozen
crumpets as well.
LIFT & LOOK
™
BUTTON
This feature automatically raises and lowers
the carriage so you can check progress
without interrupting and/or cancelling the
toasting cycle.
To select this feature:
1. The LIFT & LOOK™ button surround
will illuminate in white during the
toasting cycle and when using the A BIT
MORE™ feature. You can press the LIFT
& LOOK™ button during toasting cycle
to view the toasting progress. If selected,
the LIFT & LOOK™ button surround
will flash. The LED toasting progress
indicator will cease to flash indicating
that the selected toasting cycle time has
not been interrupted. When the LIFT &
LOOK™ cycle has finished, the toasting
cycle will re-commence, indicated by the
resumed flashing of the LED toasting
progress indicator.
2. Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination and cannot be activated
in this time.
TOAST READY ALERT
A toast ready alert will sound when the
toasting cycle has finished and the carriage
has risen and locked into the raised position.
The default setting for the Toast Ready Alert
is High, but can be adjusted to Low or Mute.
Adjusting the Sound Level of the Toast
Ready Alert
Press and hold down the LIFT & LOOK ™
button for 2 seconds until the
A BIT MORE™, CRUMPET/FRUIT BREAD,
& FROZEN button illuminate white.
Mute:
Press FROZEN button, the light will flash
three times.
Low:
Press CRUMPET/FRUIT BREAD button, the
unit will beep three times with low sound.
High:
Press A BIT MORE™, the unit will beep
three times with high sound.
Loading ...
Loading ...