Loading ...
Loading ...
Loading ...
16
PAUSE AND SERVE
Using the pause and serve feature: If you wish to serve a cup of coffee before the brew cycle
is completed, simply remove carafe from the warming plate. Dripping will automatically cease.
Return the carafe onto the warming plate, dripping will resume.
CAUTION: To prevent injury when utilizing pause and serve feature, replace carafe within 30
seconds after removing during the brewing process.
1. After approximately 2 cups of coffee have been brewed, the carafe may be slowly removed
and the coffee will stop dripping.
2. The ow valve is located on the bottom of the lter holder and is activated when the carafe
is removed. This design makes it possible for you to remove the carafe and pour a cup of
coffee before the entire carafe is brewed.
IMPORTANT: When replacing the lter holder, the ow valve must be properly inserted into
the front hole of the machine, so that it can be seen as it sits on the top of the carafe lid.
3. When using this feature, make sure that the carafe is replaced under the lter holder within
30 seconds to prevent overow.
BREWING A SECOND POT OF COFFEE
To brew another pot of coffee, press the BREW NOW/AUTO OFF button to turn the coffee maker
off. Wait 15 minutes to allow the heating element to cool.
Remove and dispose of the used coffee grounds; then rinse the carafe and lter basket with
water and repeat the brewing procedure detailed in the “BREWING COFFEE” section.
NOTE: If you do not allow the appliance to cool completely before reuse, water in the water
reservoir may overheat, causing steam to be released. This could result in burns and/or other
personal injury.
HINTS FOR GREAT TASTING COFFEE
• A clean Coffee Maker is essential for making great tasting coffee. Regular cleaning,
as described in the Cleaning & Maintenance Instructions and Descaling sections of this
Instruction Manual is highly recommended.
• Always use fresh, cold water in your Coffee Maker.
Loading ...
Loading ...
Loading ...