Loading ...
Loading ...
Loading ...
28
USA
C
You can put about 4.4
Pounds of softening salt into
the salt reservoir.
5. Replace the lid and tighten it when
the reservoir is full.
C
You need to add salt right
before starting the machine.
Thus, the overflowing
salty water will be flushed
immediately, preventing
the risk of corrosion in
machine. In cases where
you would not start washing
immediately, run your
machine empty in the
shortest program.
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in
water may take a couple
of hours. Therefore, Salt
Indicator remains on for a
while after adding salt into
the machine.
10. CARE AND MAINTENANCE
A
WARNING:Before cleaning
or carrying out maintenance,
switch off the appliance,
disconnect the mains plug
and turn off the water tap.
A
WARNING:Do not repair
or replace any part of the
dishwasher or attempt any
servicing unless specifically
recommended by this
manual. We recommend
that the dishwasher only be
repaired by an authorized
service agent.
A
CAUTION :To avoid the
possibility of slipping,
keep the floor around the
dishwasher clean and dry.
Keep your appliance free
from the accumulation of
combustible materials, such
as lint, rags, and chemicals.
If the dishwasher is not in
use for an extended period
of time, we recommend you
check that the baskets are
empty, leave the inside of the
dishwasher clean, the door
cracked open to allow air to
circulate, turn off both the
power and water supply to
the dishwasher.
Loading ...
Loading ...
Loading ...