Liebherr MW1801 Use and Care Manual

Loading ...

LEANING

Inserting the Wooden Shelf

Removing and Inserting the

Wooden Shelves

The wooden shelves can be removed for easier clean-

ing of the inside of the appliance.

Pull out the wooden shelf, press the sides (1) gently, lift

it upwards (2), and pull it out forwards (3).

Position the wooden shelf at the rear (1), slide it back-

wards on the rails (2), attach it at the end (3), and then

press it downwards (4) until the shelf engages in the

rails (5).

Removing the Wooden Shelf

Cleaning

WARNING!

Before cleaning, always disconnect the appliance from

the power source. Pull out the plug or switch off the

fuse!

If the door is left open for a lengthy period, the tempera-

ture in the appliance’s compartments may rise dramati-

cally.

•฀Clean฀the฀interior,฀equipment,฀and฀external฀walls฀

using lukewarm water and a little detergent. Never

use chemical solvents or cleaning products wich con-

tain sand or acid.

•฀Use฀a฀glass฀cleaner฀to฀clean฀the฀glass฀surfaces,฀and฀

a conventional stainless steel cleaning product for

stainless steel surfaces.

CAUTION!

Risk of damage to the appliance components and risk

of injury due to hot steam.

Do not use steam cleaning equipment to clean the

appliance!

•฀Make฀sure฀that฀no฀water฀gets฀into฀the฀electrical฀parts฀

or the ventilation grille.

•฀Dry฀everything฀well฀with฀a฀cloth.

•฀Do฀not฀damage฀or฀remove฀the฀model฀plate฀on฀the฀

inside of the appliance – it is important for customer

service purposes.

If the appliance is left empty for a lengthy period, it must

be switched off, defrosted, cleaned, and dried, and the

door is to be held open to prevent mold formation.

Loading ...

Liebherr MW1801 18 Inch Built-In Panel Ready Dual Zone Smart Wine Cooler