Loading ...
Loading ...
Loading ...
,
Turn the iron off and unplug it
from the outlet before performing
any maintenance work.
Cleaning the heater plate
^
Check that the temperature selector
is set g.
^
Allow the heater plate to cool before
cleaning.
^
Pull the emergency release lever up
to make sure easier cleaning.
^
Clean lime or starch deposits from
the heater plate using a non abrasive
household cleaner. Avoid spraying
the heater plate.
Do not use abrasive cleaners.
Cleaning the casing
^ Depending on soiling, the casing can
be wiped down with a dry or damp
cloth.
Do not use abrasive cleaners.
Cleaning the water reservoir
If the steam nozzles seem to be
producing less steam, this may mean
there are lime deposits in the water
reservoir, caused by hard water. To
remove these lime deposits, rinse the
reservoir under tap water.
^
Unplug from the socket.
,
Wait until the iron is cold before
you attempt to rinse out the water
reservoir.
Depending on the hardness of the tap
water used, the water reservoir will
need to be rinsed out after 3 to 10
tankfuls.
Stubborn deposits can be removed
with a lime remover.
Always follow the manufacturer's
instructions for use of such products
(dose, time, etc.).
^
Fill the water reservoir halfway
3/4 pint (400 ml) and close the cap.
^
Roll the heater plate backwards and
forwards several times.
^
Rinse twice thoroughly with tap water
to help prevent damage to laundry
items.
See the section on "Steam" for
instructions on filling and emptying the
water reservoir.
Cleaning and care
28
Loading ...
Loading ...
Loading ...