Loading ...
Loading ...
Loading ...
21
Information for U.K. only
WARNING - THIS APPLIANCE MUST BE
EARTHED.
Important:
This apparatus is supplied with an
approved moulded 13A plug. To change
a fuse in this type of plug proceed as
follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS
1362 5A,A.S.T.A. or BSI approved
type.
3. Retit the fuse cover.
If the fitted plug is not suitable for your
socket outlets, it should be cut off and
an appropriate 3-pin plug fitted in its
place.
If the mains plug contains a fuse, this
should have a value of 5A. If a plug
without a fuse is used, the fuse at the
distribution board should not be greater
than 5A.
NOTE:
The severed plug must be
destroyed to avoid a possible
shock hazard should it be
inserted into a 13A socket
elsewhere.
(A)
(B)
How to connect a plug
The wires in the mains lead are coloured
in accordance with the following code:
BLUE -“NEUTRAL”(“N”)
BROWN -“LIVE”(“L”)
GREEN&YELLOW -“EARTH”(“E”)
1. The GREEN&YELLOW wire must
be connected to the terminal in
the plug which is marked with
the letter "E" or by the Earth
symbol or coloured GREEN or
GREEN&YELLOW.
2. The BLUE wire must be connected
to the terminal which is marked with
the letter "N" or coloured BLACK.
3. The BROWN wire must be
connected to the terminal which
is marked with the letter "L" or
coloured RED.
Before replacing the plug cover, make
certain that the cord grip is clamped
over the sheath of the lead - not simply
over the three wires.
-
Loading ...
Loading ...
Loading ...