Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
TO OPERATE Off[ FAN ONLY:
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
YOU WiLL SEE:
Note: Use this function only when cooling is not desired, such as for room air circulation.
You can choose any fan speed you prefer, EXCEPTAUTO FAN.
During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
TO USE THE
POWER SAVER FEATURE:
DO THIS:
PRESS
MODE BUTTON
CHOOSE
POWERSAVER
YOU WILL SEE:
Note: In this mode, the fan will continue to run for 3 minutes after the compressor shuts off. The fan then cycles on for 2
minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the unit cooling system
starts again.
START/STOP FEATURE:
FIRST
DO THIS:
PRESSTIMER
BUTTON
YOU WILL SEE:
DO THIS:
TIMER BUTTON
Note 1: For Delay Stop, the unit must be in the ON position.
Note 2: For Delay Start, the unit must be in the OFFposition,
Toadjust timer setting, tap or hold the UParrow(A) or DOWN arrow (v) to change the delay time by ,5 hour increments up to
10 hours, then by 1 hour increments up to 24 hours, The control will count down the time remaining until start (8, 7,5, 7, etc,),
The Delay Star mode automatically selects cooling with maximum Fan Speed, The temperature maintained will be the same as
previously set, Tochange the set temperature, press"COOL" then Up or Down arrows until the desired temperature isindicated
on the display, After 5 seconds, the control will automatically change the display back to the hours remaining until the unit will
start/stop, Turning the unit "ON" or "OFF" at any time will cancel the Delay Start!Stop function,
Loading ...
Loading ...
Loading ...