English
English
English
Specifications
Bluetooth Version
Bluetooth Chip
Maximum Working Range
Play Time
Earbuds Charging Time
Case Charging Time
Charging Case Recharge Earbuds
Earbud Dimension
Bluetooth 5.2
Qualcomm® QCC3040
33 feet / 10m (no obstacle)
5 hours (volume at 60%)
1.5 hours
1.5 hours
4 times
1.54*0.70*0.64 in / 39.2*17.7*16.2 mm
Charge
Charge the earbuds
3.SOUNDPEATS TrueAir2 earbuds can remember previously paired device. To
reconnect to one device, you only need to activate the Bluetooth in the
device and take out both earbuds, the earbuds will automatically connect
to each other, and then pair to the device. If they don’t re-pair automatical-
ly, please choose the pairing name to connect again.
4.Mono mode: TrueAir2 earbuds support working with either earbud only aer
successfully connected.
English
English
English
Power On
Power O
Play / Pause
Volum e -
Volum e +
Previous Track
Next Track
Answer / Hang Up Phone
Call
Reject Phone Call
Switch Between Two Calls
Manually Enter Pairing
Mode
Activate Voice Assistant
Auto:
Take out from charging case
Manually: Press and hold the MFB for 1.5s
Auto:
Place back into charging case
Manually: Press and hold the MFB for 10s
Double tap the MFB
Single tap the le MFB
Single tap the right MFB
Press and hold le MFB for 1.5s
Press and hold right MFB for 1.5s
Double tap the touch button
Press and hold the MFB for 1.5s
Press and hold the MFB for 2s
Press and hold the MFB for 6s
Triple tap the MFB
Button Control
Factory Reset
(Try the following steps if you fail building connection between two earbuds, or
between earbuds and device.)
1.Clear the pairing record between the earbuds and all your devices.
2.Place back both earbuds and make sure they are in charging status. Press
and hold both MFBs for 10 seconds until both indicators ash in white twice.
1.Place back the earbuds in right charging slots
and make sure the contactors connect.
2.Charging starts with red indicators staying on,
and ends with red indicators going out.
SOUNDPEATS TrueAir2 earbuds are provided with a charging case for easy carrying
and charging. It can recharge both earbuds for around 4 times.
English
English
English
9
SOUNDPEATS TrueAir2 说明书 七国 简版
材质：封面封底100克书纸 内页80克书纸 尺寸：90 x 84 mm
Pairing
1.Take both earbuds out of the charging case while the case is with enough
power le, the le and right earbuds will pair to each other at rst with a
prompt suggests successfully connected. Aer this, the le indicator will turn
white, and right indicator ashes in red and white alternately with a voice
prompt “Pairing” indicating the earbuds enter pairing mode.
2.Activate the Bluetooth on your device and choose "SOUNDPEATS TrueAir2" to
connect. The right indicator will stop ashing with a voice prompt "Connect-
ed".
1. Identify the le and right earbuds.
2. Rotate earbuds to nd most
comfortable angle.
Wearing
Getting Started
2 3 4 5 6 7
1
Product Diagram
Package Content
Charge the case
The charging indicators don’t stay on red aer
placing back the earbuds, please charge the
case then.
1.Use a Type-C adapter to charge the case
(current not over 1A). The LEDs stay on red
while charging, and go out aer fully
charged.
2.Please charge the earbuds and case at least
once per 3 months when not in use for a long
time.
8
We warrant this product to be free from manufacturing defect for 12 MONTHS.
support@soundpeatsaudio.com
www.soundpeatsaudio.com
Please scan the QR code or search the link below for detailed PDF manual.
Warranty Regulations
https://soundpeatsaudio.com/downloads/
1.5s2s 3x 2x 1x 1.5s 2s3x2x1x
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifcations not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
FCC Statement
Qualcomm
Qualcomm aptX, Qualcomm TrueWireless and Qualcomm cVc are products of Qualcomm
Technologies, Inc. and/or its subsidiaries.
Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated, registered
in the United States and other countries.
TrueAir2
TrueAir2
USER MANUAL | Manuel d'Utilisation | Bedienungsanleitung |
Manual de Instrucciones | Manuale di istruzioni
| 取扱説明書|说明书
Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
www.soundpeatsaudio.com
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
018-200279
FCC ID: 2AFTU-DD012 MADE IN CHINA
日本瑞豊
株式会社
2 4
1
3
SOUNDPEATS TrueAir2
Connected
Loading ...
Loading ...
Loading ...