Sencor SHB 4378WH Hand Blender

User Manual - Page 8

For SHB 4378WH.

PDF File Manual, 9 pages, Download pdf file

SHB 4378WH photo
Loading ...
Loading ...
Loading ...
- 8 -
06/2021
Copyright © 2021, Fast ČR, a.s.
WHIPPING
INGREDIENTS AMOUNT SPEED SETTING PROCESSING TIME
Egg whites 4 pcs Maximum 60 s
Whipping cream 200 ml Maximum 60 s
Light doughs 500 g Medium to maximum 60 s
Whip cream and egg whites in atall narrow beaker. When whipping egg whites, the whisks A9 and the beaker must always be perfectly clean and
dry, otherwise whipping up the egg whites may not succeed.
CLEANING AND MAINTENANCE
Before cleaning it, make sure that the appliance is turned off, disconnected from the power socket and that the rotating parts have stopped.
Disassemble the appliance into its individual parts. Thoroughly wash the attachments and containers, using warm water and neutral kitchen
detergent. Then rinse them with clean water and allow them to dry naturally or dry them out thoroughly using awiping cloth.
Clean parts A8 and A10, which are equipped with agear system, only using adampened cloth. Take care that water does not enter into these parts.
When cleaning the blender attachment A4, do not submerge the top end that connects to the motor unit A3.
Beaker A6, bowl A13 and the blade assembly A11 may be washed in adishwasher. Other parts are not intended for washing in adishwasher.
Attention:
When cleaning blade assemblies A5 and A11, be very careful not to injure yourself on their sharp edges.
After finishing using the stick blender, it is possible to clean the blade assembly A5 by submerging it in warm water with kitchen detergent, and
running it for ashort time. Then disconnect the appliance from the power socket, disassemble it, and rinse the blade assembly with clean drinking
water and dry it thoroughly.
To clean the outer surface of the motor unit A3, use acloth lightly dipped in aweak detergent solution. After applying the detergent solution, wipe
the surface with acloth lightly dampened in clean water and then wipe dry. Do not use solvents, abrasive cleaning products, etc. for cleaning the
appliance. Otherwise the surface coat of the appliance may be damaged.
Attention:
Never submerge the motor unit A3 or the power cord in water or in any other liquid.
STORAGE
When you have finished using the appliance, place it and its accessories in aclean, dry place out of children’sreach. Keep the stored appliance
and its accessories away from extreme temperatures, direct sunlight and excessive humidity and do not store it in an overly dusty environment.
TECHNICAL SPECIFICATIONS
Rated voltage range ........................................................................................................................................................................................................................................220–240 V
Rated frequency ..................................................................................................................................................................................................................................................50/60 Hz
Rated power input .................................................................................................................................................................................................................................................. 800 W
Electrical shock protection class ................................................................................................................................................................................................................................... II
Noise level .............................................................................................................................................................................................................................................................. 85 dB(A)
The declared noise emission level of the appliance is 85 dB(A), which represents alevel Aof acoustic power with respect to areference acoustic
power of 1 pW.
EXPLANATION OF TECHNICAL TERMINOLOGY
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty insulation.
Amendments to text and technical parameters are reserved.
Loading ...