Loading ...
Loading ...
Loading ...
Before you carl for service...
PROBLEM Possible Causes What To Do
Time Remaining Theestimated time mag change . Thisis normal,
jumped to a when a smaller load than usual
lower number is drging
Cannot make a The DRYNESSLEVEL,TEMP . Thisis normal.
selection and the or OPTIONthat you are
dryer beepstwice trying to select is incompatible
with the chosen dry cycle
Dryer is running but The EXTENDTUMBLE . Thisis normal. During extended tumbling, the time
O0is displaged in option was chosen remaining is not displaued.Theextended tumbling
Time Remaining option lastsapproximatelu 20 minutes.
Clean Lint Filter (message) POWERbutton was activated . PressSTARTto begin a dru cycle and the messagewill
disappea_
Dryer doesn't heat Fuse is blown/circuit breaker . Checkthe building's fuse/circuit breaker box and
istripped; the drger mag tumble replaceboth fuses or reset both breakers.Your drger
but not heat mag tumble ifonlg one fuse is blown or one breaker
tripped.
Gasservice is off o Hake suregas shutoff at drger and main shutoff are
fullg open.
LPgas supplg tank is emptg . Refillor replacetank. Drger should heat when utilitg
or there has been a utilitg service isrestored.
interruption of natural gas
{gasmodels)
Inconsistent drying times Tgpeof heat . Drgingtime will varg according to the tgpe of heat used.
If gou recentlg changed from an electric to a gas
(natural or LP)drger,or vice versa,the drging time
could be different.
Tgpeof load and . Theload size,tgpes of fabric,wetness of clothes and the
drging conditions length and condition of the exhaust sgstem will affect
drging times.
Glow at the rear Heaters behind the drum . Thisis normal. Under certain drging conditions and
of the drum room ambient lighting,the glow of the heaters may be
visible at the rear of the drum.
Clothes are still wet Thedoor was opened mid-cgcle. . A drg cgcle must be reselectedeach time a new load
and dryer shut off The load was then removed from is put in.
after a short time the dryer and a new load put in
without selecting a new cycle
Small load o When drying 3 items or less,choose SPEEDDRYor
TIMEDDRY.
Load was alreadg dry except . ChooseSPEEDDRYor TIMEDDRYto dry damp collars
for collars and waistbands and waistbands. In thefuture, when drying a load with
collars and waistbands, choose MOREDRY.
Drger is not level . Hove dryer to an evenfloor space or adjust levelinglegs
as necessary until even.
Clothes are wrinkled Overdrging . Select a shorter drying time.
Removeitems while they still hold a slight amount
of moisture. Selecta LESSDRYor DAMPsetting.
Letting items sit in drger after . Removeitems when cgcle ends and fold or hang
cgcle ends immediately, or usethe EXTENDTUMBLEoption.
24 Overloading . Separate large loads into smaller ones.
Loading ...
Loading ...
Loading ...