Loading ...
PROBLEM POSSIBLECAUSE POSSIBLESOLUTION
Cleaner hard to Incorrect carpet height set- Move nozzle control knob to a higher set-
push ting ting
Blockage in hose Clear blockage.
Cleaning tools
won't pick up
Visible dirt
leaking through
final filter
Dirt inside dirt
cup stops
spinning
Powered hand
tool brush roll
won't turn
Blockage in turbine channel
Low cleaner suction
Note: Heavy debris may settle to the bot-
tom of the dirt cup and prevent the dirt
from spinning without affecting cleaning
performance. The cleaner can continue
to be used even if the dirt is not spinning
inside the dirt cup.
However, if the dirt does stop spinning
AND there is a noticeable decrease of per-
formance, check the items under "Cleaner
won't pick up".
Remove blockage.
Check items under "Cleaner won't pick up",
Clearing blockages
Disconnect cleaner from electrical outlet,
Low suction or pick up may be due to a
blockage in the system. Refer to the follow-
ing steps to check for blockages continuing
with each step until the blockage is found:
A. Ifa blockage occurs during floor cleaning:
Turn cleaner OFF and disconnect from elec-
trical outlet.
1, Check fullness of dirt cup and filter
assembly; empty cup and clean filters if
needed.
A"
Check dirt duet
2. Remove dirt cup,
look in duct (A}.
3. Clear blockage
from dirt duct.
E!
Check brush roll
4. Turn cleaner OFF
and unplug.
5. Turn cleaner over
and dear blockage
from brush ro11.
Return cleaner to
operating position.
Turn cleaner back
on and continue
cleaning.
17
Checkhosetube
6. Turn cleaner OFF
and unplug.
7. Remove hose
from tube. Clear
blockage from
tube. Also, check
hose for blockage.
Loading ...
Loading ...
Loading ...