Loading ...
Loading ...
Loading ...
DelayHours
Select this option to run your dishwasher at a later time or
during off-peak hours. You can add items to the load
anytime during the delay countdown. After adding items,
close the door firmly until it latches. The delay countdown
will not continue if the door is not latched.
• You can delay the start of a cycle up to 12 hours.
• The first time you use Delay Hours, you will see
showing a 1 hour delay.
To delay the start
1. Close the door.
2. Select a wash cycle and options.
3. Repeatedly press
@
until you see the desired hours of delay in the display.
When the delay reaches 12 hours, the delay turns off.
Press DELAY HOURS again to select a new number of
delay hours.
4. Press STAR£
NOTE: To cancel the delay, press CANCEL/DRAIN until no
delay hours show in the display.
IMPORTANT:
Operate your dishwasher only when you are at home.
If your home is equipped with a water softener, do not
start the dishwasher during the regeneration of the
softener.
Follow the progress of your dishwasher with the Cycle
Status Indicators. CLEAN glows when a cycle is finished.
The light turns off when you open the door or press
Cancel/Drain.
FAVORITECYCLESET SENSINO WATERH_I1HO SANICOMPLETE CLbiN
Favorite Cycle Set
FAVORITE CYCLE SET glows when your favorite cycle
selections are saved. If the power is off, or if the door is left
open for an extended period of time, the Favorite Cycle
memory defaults to Normal Wash and No Heat Dry. The
light goes off.
Sensing
Your dishwasher senses the soil level on the dishes. Soil
level determines the length of some cycles, the amount of
heat added to the wash or rinse, and the cycle needed for
the load. SENSING glows during the soil sensing parts of
the cycle. Wash action continues while sensing occurs.
Water Heating
WATER HEATING glows, and the cycle progression
pauses, whenever water is heated during a cycle. Wash or
rinse action continues as the water heats.
Sani Complete
If you select the Sani Rinse option, SANI COMPLETE
glows when the Sani Rinse cycle is finished. If your
dishwasher did not properly sanitize your dishes, the light
flashes at the end of the cycle. This can happen if the cycle
is interrupted. The light goes off when you open the door.
Clean
CLEAN glows when a cycle is finished. The light turns off
when you open the door, press Cancel/Drain, or press
another cycle or option.
Lock On
When LOCK ON is lit, all buttons are disabled.
LOCKON
You can turn on the Lock while the dishwasher is running.
To lock or unlock the controls, see "Option Selections."
Rinse Aid Empty
Fill the Rinse Aid dispenser when RINSE AID EMPTY is lit.
Rinse aids prevent water from forming droplets that can
dry as spots or streaks.
RINSEAIDEMPTY
If the Rinse Aid dispenser is empty, the light glows when
you select a cycle or while a cycle is running.
18
Loading ...
Loading ...
Loading ...