Kenmore 25316562100 freezer

User Manual - Page 8

For 25316562100.

PDF File Manual, 10 pages, Download pdf file

Loading ...
Loading ...
Loading ...
TROUBLESHOOTING Before calling for service, review this list. It may save you time and expense. This list
includes common occurences that are not the result of defective workmanship or
GUIDE materials in this appliance.
PROBLEM CAUSE CORRECTION
FREEZER DOES NOT RUN
Freezer does not run.
Freezer runs too much or too
long.
- Freezer is plugged into a circuit
that has a ground fault interrupt.
- Temperature control is in the
OFF position.
- Freezer may not be plugged in,
or plug may be loose.
- House fuse blown or tripped
circuit breaker.
, Power outage.
, Room or outside weather is
hot.
- Freezer has recently been
disconnected for a period of
time.
- Large amounts of warm or hot
food have been stored recently.
- Lid is opened too frequently
or too long.
- Freezer lid may be slightly
open.
- Temperature Control is set too
low.
- Freezer gasket is dirty, worn,
cracked, or poorly fitted.
Use another circuit. If you are unsure about the outlet,
have it checked by a certified technician.
See Setting the Temperature Control Section.
,, Ensure plug is tightly pushed into outlet.
,, ChecWreplace fuse with a 15 amp time-delay fuse.
Reset
circuit breaker.
,, Check house lights. Call local Electric Company.
,, It's normal for the freezer to work harder under these
conditions.
,, It takes 4 hours for the freezer to cool down completely.
,, Warm food will cause freezer to run more until the
desired temperature is reached.
,, Warm air entering the freezer causes it to run more.
Open lid less often.
See "LID PROBLEMS" Section.
,, Turn control knob to a warmer setting. Allow several
hours for the temperature to stabilize.
,, Clean or change gasket. Leaks in the door seal will
cause freezer to run longer in order to maintain desired
temperature.
Interior Freezer temperature is , Temperature Control is set too ,, Turn the control to a warmer setting. Allow several hours
too cold. low. for the temperature to stabilize.
Interior Freezer temperature is
too warm.
, Temperature Control is set too
warm.
- Lid is kept open too long or is
opened too frequently.
- Lid may not be seating
properly.
- Large amounts of warm or hot
food may have been stored
recently.
- Freezer has recently been
disconnected for a period of
time.
,, Turn control to a colder setting. Allow several hours for
the temperature to stabilize.
,, Warm air enters the freezer every time the lid is
opened. Open the lid less often.
See "LID PROBLEMS" Section.
,, Wait until the freezer has had a chance to reach its
selected temperature.
,, Freezer requires 4 hours to cool down completely.
Freezer external surface - The external freezer walls can This is normal while the compressor works to transfer
temperature is warm. be as much as 30°F warmer heat from inside the freezer cabinet.
than room temperature.
SOUND AND NOISE
Louder sound levels whenever , Modern freezers have This is normal. When the surrounding noise level is low,
freezer is on. increased storage capacity and you might hear the compressor running while it cools
more stable temperatures, the interior.
They require a high efficiency
compressor.
Longer sound levels when , Freezer operates at higher This is normal. Sound will level off or disappear as
compressor comes on. pressures during the start of freezer continues to run.
the ON cycle.
8
Loading ...
Loading ...