Loading ...
Loading ...
Loading ...
Operutin9Tips
Clean the Lint Filter
• After each load.
• To shorten drying time.
• To operate more energy efficiently.
Note
• Do not operate the dryer without the lint filter in
place.
Care& Cleaning
Control Panel
Clean with a soft, damp cloth. Do not use abrasive
substances.
Tumbler
Remove any stains (such as crayon, ink pen or fabric
dye) with soap and water. Then tumble clean old
towels or rags to remove any excess stain.
Cabinet
Wipe off any marks with soap and water. Use an
appliance wax once a year if desired.
Dryer Exhaust System
Inspect and clean once a year to maintain optimum
performance. The outside exhaust hood should be
cleaned more frequently to ensure proper operation.
(Refer to the Installation Instructions for more
information.)
Load the Dryer Properly
Place only one washload in the dryer at a time.
Mixed loads of heavy and lightweight clothes will dry
differently. Lightweight clothes will dry, while heavy
clothes may be damp.
Add one or more similar items to the dryer when only
one or two articles need drying. This improves the
tumbling action and drying efficiency.
Overloading restricts tumbling action, resulting in
uneven drying as well as excessive wrinkling of some
fabrics.
iio
iio
Replacing the Drum Light
Cselect models)
Unplug or disconnect the dryer from the power
supply.
Lift top of dryer by inserting a putty knife under
top, 4" in from each side.
Rotate bulb holder to vertical position before
removing bulb.
4. Push bulb down and rotate counterclockwise to
rem ove.
.
7.
Replace with a 25 watt, 115/125 volt twist lock
utility light Part No. 53-0570 or equivalent. Place
bulb in socket, push down and rotate clockwise.
Rotate bulb holder to horizontal position.
Place top of dryer back in original position. Make
sure metal tabs hold top in place.
8. Reconnect dryer to power supply.
Loading ...
Loading ...
Loading ...