Loading ...
Loading ...
Loading ...
UNPACKING
This product has been shipped completely assembled.
• Carefully remove the t001and any accessories from the box.
Make surethat all items listed in the packing list are included.
• Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
• Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
• If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Sander
Sanding Disc
Dust Bag
Operator's Manual
A
WARNING: If any parts are missing do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
a,
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
,_ WARNING: Do not connect to power supply until
assembly is complete. Failure to comply could result
in accidental starting and possible serious injury.
_k WARNING: Do not allow familiarity with tools
to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
_k WARNING: Always wear safety goggles or safety
glasses with side shields when operating power
tools. Failure to do so could result in objects being
thrown into the eyes resulting in possible serious
injury.
,_, WARNING" Do not connect to power supply when
replacing blades, bits, sanding discs, sanding pads
or sandpaper. Failure to heed this warning could
result in possible serious injury
APPLICATIONS
You may use this tool for the purposes listed below:
• Sanding on wood surfaces
• Removing rust from and sanding steel surfaces
SELECTING SANDING DISCS
Selecting the correct size grit and type sanding disc is
an extremely important step in achieving a high quality
sanded finish. Aluminum oxide, silicon carbide, and other
synthetic abrasives are best for power sanding. Natural
abrasives, such as flint and garnet are too soft for use in
power sanding.
In general, coarse grit will remove the most material and
finer grit will produce the best finish in all sanding opera-
tions. The condition of the surface to be sanded will deter-
mine which grit will do the job. If the surface is rough, start
with a coarse grit and sand until the surface is uniform.
Medium grit may then be used to remove scratches left by
the coarser grit and finer grit used for finishing of the sur-
face. Always continue sanding with each grit until surface
is uniform.
ATTACHING VELCRO ® TYPE SANDING DISCS
See Figure 2.
• Unplug the sander.
• Align the holes in the sanding disc with the holes in the
hook and loop backing pad.
NOTE: Holes in sanding disc must line up with holes in
the backing pad in order for the dustless feature of the
sander to function properly.
• Press the sanding disc against the backing pad as
firmly as possible.
NOTE: For best adhesion, we recommend that you
clean the backing pad and the sanding disc back-
ing occasionally by brushing them lightly with a small
brush.
VELCRO
SANDINGDISC
BACKING
PAD
Fig. 2
Loading ...
Loading ...
Loading ...