F3AHS User Manual

Loading ...

4) Remove the lower hinge bracket and thrust washer. See Fig. 11. Retain thrust washer

for opposite side lower hinge bracket installation. Remove the ller screws from the

opposite side lower hinge bracket holes and mount them into the holes of the removed

lower hinge bracket. NOTICE! Be sure to reuse the bracket screws for mounting the

bracket as the bracket screws are 5×12 and ller screws are 5×10.

5) Secure the lower hinge bracket to the opposite side lower hinge bracket location, then

place the thrust-washer on the lower hinge bracket. See Fig. 12.

6) Remove the screw and washer securing the upper hinge bracket to the spring cartridge.

Remove the 2 screws securing the spring cartridge to the door, then remove the spring

cartridge from the door. See Fig. 13.

Fig. 11

Fig. 12

Fig. 13

Lower Hinge

Bracket

Thrust

Washer

Thrust

Washer

Nylon Bearing

Filler Screws

Nylon Bearing

Nylon Bearing Hole

Formerly Spring

Cartridge Hole

Fig. 14 Fig. 15

7) Rotate the door 180 degrees, to its new orientation. Remove the nylon bearing and ller

screws. See Fig. 14. NOTICE! Care should be taken not to damage the door. Mount

the nylon bearing and ller screws into the holes left by the spring cartridge in the lower

section of the door. See Fig. 15.

Upper Hinge Bracket Screw

Upper Hinge Bracket

Spring Cartridge

Door

Spring Cartridge Screws

Upper Hinge Bracket Washer

Filler

Screws

Filler Screws

Loading ...

Hoshizaki F3AHS 79.03 cu. ft. Solid Half Door Commercial Reach In Freezer