Loading ...
Loading ...
Loading ...
6
INSTALLATION INSTRUCTIONS
POSITIONING THE APPLIANCE
The area in which the fridge is to be installed must be relatively cool, dry, and suitably ventilated. The area must be
protected against any inclement weather (rain, snow) and excessive surface dust. To ensure proper function, the appliance
must be placed on a flat, firm, and stable surface resting level on all four supports. The floor must be strong enough to
support a fully loaded cabinet. Use wood or metal shims to level the fridge if necessary. Do not place the appliance in
direct sunlight or near sources of heat, such as a stove or heater, as this can increase electrical consumption. Extreme
cold ambient temperatures may also cause the appliance to perform improperly.
Do not place the fridge close to heat sources (heater, stove, boiler, chimney, etc.), and avoid prolonged exposure to direct
sunlight. This appliance uses the exterior walls to transfer heat from the inside of the cabinet. Ensure that there is
adequate space between the fridge and neighboring walls or large objects. A minimum spacing of 3 inches (7.6 cm) is
highly recommended. This will provide sufficient airflow around the appliance resulting in more efficient operation and
longer appliance lifetime. Always keep the air vent openings of the compressor housing cover free from dust and
obstructions. This appliance is intended for free-standing installation only and is not intended to be built into a cabinet
or counter.
27.2”
74.6”
23.4”
2”
42.6”
48.6”
49.4”
90°
135°
40”
42.1”
23.6”
29.3”
Loading ...
Loading ...
Loading ...