Loading ...
Loading ...
Loading ...
Select the wash cycle and options desired. Or press START to
use the same cycle and options as the previous cycle.
A "O" shows the steps that are in each cycle.
Water usage is shown in U.S. gallons/liters.
These models meet the ENERGY STAR®guidelines for energy
efficiency.
IMPORTANT: Typical cycles may take several hours depending
on water temperature.
Pots Pans
Use this cycle for hard-to-clean, heavily-soiled pots, pans,
casseroles, and regular tableware.
Use both detergent dispenser sections.
Wash Main Rinse Rinse Final Dry Approx- Water
Wash Heated imate Usage
Rinse Time (gal/L)
• • • • • 2.5 hrs* 6.9/26.1
Normal Wash
Use this cycle for loads with normal amounts of food soil. (The
energy-usage label is based on this cycle.) During the main
wash, the wash action will repeatedly pause for several
seconds.
Use both detergent dispenser sections.
Wash Main Rinse Rinse Final Dry Approx- Water
Wash Heated imate Usage
Rinse Time (gal/L)
• • • • • 2 hrs* 5.9-6.9/
Purge 22.3-26.1
Light Wash
Use this cycle for china and crystal. This cycle uses a light
wash and gentle dry. During the heated dry, the heating
element cycles on and off.
Use main detergent dispenser section.
Wash Main Rinse Rinse Final Dry Approx- Water
Wash or Purge Heated imate Usage
Rinse Time (gal/L)
• • • • € 1.5 hrs* 5.9/22.3
Purge cycled
*If the incoming water temperature is less than the
recommended temperature, the cycle will automatically
compensate by adding time, heat and water as needed.
1. Press CANCEL. The Cancel light glows.
2. The dishwasher starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light turns off after 2
minutes. The door must be closed for the dishwasher to
drain.
To stop the drain
You can press CANCEL again to stop the drain. Remember to
drain the dishwasher before starting a new cycle.
To clear the indicators
Press CANCEL before starting the dishwasher to clear all options
and cycles.
During the first minute of a cycle
1. Select a new cycle and/or options.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. Make sure the door is closed. The dishwasher resumes a new
cycle and/or option after a 5-second pause.
After the first minute era cycle
1. Press CANCEL. The Cancel light glows. Your dishwasher
starts a 2-minute drain (if needed). Let the dishwasher drain
completely.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. Make sure the door is closed.
4. Select a new cycle and/or options.
5. Press START.
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1. Carefully open the door slightly to stop the cycle. Wait for the
spraying action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. Close the door firmly until it latches. The dishwasher resumes
the cycle after about a 5-second pause.
OrS:io : Seect
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off,
or select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
Press START to use the same cycle and option(s) as the previous
wash cycle.
NOTE: Ifthe last cycle you completed was a rinse cycle, when
you press Start, the dishwasher runs the last full wash cycle and
options.
11
Loading ...
Loading ...
Loading ...