Loading ...
Loading ...
Loading ...
22 www.electrolux.com
Press AutoDose softener touchpad to
toggle on and o, the relevant symbols
will show on display if enabled.
To Activate/Deactivate AutoDose
Softener (
)
Enter the AutoDose conguration
mode before proceeding with any
program setting. The conguration
mode may cancel temporary
settings.
AutoDose conguration
mode
1. Press the On/O button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. To enter in conguration mode, touch
and hold “Temp” and “Spin” touchpads
simultaneously for a few seconds until
appears on display.
4. Press
Detergent touchpad to
select congure detergent dosage.
Touch the “Temp” touchpad repeatedly
to increase and “Spin” touchpad to
reduce. Minimum step is 1 ml (you can
press and hold touchpad to increase
the increment to 10ml/step).
Rell the tanks with the same
detergent and fabric softener as
before. If changing either of the liquid
detergents, clean the tanks before
relling (see section 8.5 for instructions
on how to clean the tanks).
If the tanks are lled before the
appliance is powered on for the rst
time, the AutoDose indicator will not
blink.
When the activated tank reaches a low level
of detergent,
indicator blinks slowly and
continuously on the display.
It will stop blinking when the compartment is
relled.
If tank is not relled, once a program has
started, the indicator will stop blinking and
stay steadily lit. Once the program is n-
ished, it will start blinking again.
If in both tanks detergent level is low, both
indicators blink, but only the set dosage for
detergent will be displayed.
5. Press Softener touchpad to select
congure softener dosage.
Touch the “Temp” touchpad repeatedly to
increase and “Spin” touchpad to reduce.
Minimum step is 1 ml (you can press and
hold touchpad to increase the increment
to 10ml/step).
6. To save and exit conguration mode,
press and hold “Temp” and “Spin”
touchpads combination again for 3
seconds or you can turn the knob to any
position.
Do not rell the AutoDose tanks unless
appliance indicates that one or both
tanks are empty.
AutoDose low level indication
Loading ...
Loading ...
Loading ...